SIGMA Capture Pro

SIGMA Capture Pro : Download

SIGMA Capture Pro allows photographers to tether the Sigma SD1 camera to their computer and take control over camera settings and capture images remotely.

It is possible to download the installer program of SIGMA Capture Pro 1.1.1 for Windows and SIGMA Capture Pro 1.1.1 for Macintosh. Please ensure that you read the system requirements for this software before downloading them.

Who can download & UPDATE ?

Customers who use Sigma SD1 and Sigma SD1 Merrill cameras.

Software you can download

Main Features

Ver.1.1.1

  • It is possible to create B/W images in RAW or RAW+JPEG mode.
    * It is necessary that the firmware in the SD1 Merrill is 1.05 or later, and 1.10 or later in the SD1.

Ver.1.1.0

  • Enables the setting of the ISO Sensitivity in steps of 1/3 EV.
  • Enables the setting of the Lower limit and Upper limit of the ISO Sensitivity in ISO Auto mode.
  • Enables the setting of “FOV Classic Blue” mode from Color mode.

Ver.1.0.1

  • Compatibility with SD1 Merrill.

Ver.1.0

  • It is possible to control cameras and take pictures from the computer. In addition, it is possible to store images to either the card in the camera or the PC Drive, or both simultaneously.
  • Even if the camera is connected to the computer, it is possible to operate the camera and take pictures by operating the camera body.
    * There is a restriction on timing for taking pictures.
  • It is possible to set how many times the shutter is released automatically at one operation. During multiple frame shooting, autofocus will set for each exposure.
    * If the focus mode is set to MF, the shutter will be released the number of times which you set without auto focusing.

Notice

  • Before you start the download of the installer program, make sure all applications in your computer are finished.
  • Click the download button, or push the right button of your mouse (“right click”) and start download.
  • Make sure SCP_1.1.1_setup.exe is saved in the destination you specified.
  • It is necessary that the firmware in the SD1 Merrill is 1.05 or later, and 1.10 or later in the SD1.

Install

  • If you have “SIGMA Capture Pro 1.1.0” installed on your computer, uninstall it by using “Add or Remove Programs” on a computer. It is not possible to install “SIGMA Capture Pro 1.1.1” properly if “SIGMA Capture Pro 1.1.0” is already installed.
  • First, you have to choose the language of the program you install. Select the language and push the OK button. Then, carry out the install according to the procedures displayed in the screen.
  • You need to restart the computer soon after this software is installed.

System Requirements

  • Pentium 4 or faster processor (Core 2 Duo or higher recommended)
  • Windows XP (Service Pack 2 or later), Windows Vista or Windows 7
  • 2GB of RAM (3GB of more recommended)
  • 1GB of available hard disk space
  • 24bit or more graphic card
  • 1024 x 768 screen resolution
  • PC with USB2.0 port (USB1.1 or lower is not recommended)

Main Features

Ver.1.1.1

  • It is possible to create B/W images in RAW or RAW+JPEG mode.
    * It is necessary that the firmware in the SD1 Merrill is 1.05 or later, and 1.10 or later in the SD1.
  • In conjunction with the Mac OS X 10.8.4, it corrects the phenomenon that the Sigma Capture Pro shuts down unexpectedly when the user selects “Camera Control” in the “USB Mode” on SIGMA SD1or SD1 Merrill and connects it to the computer.

Ver.1.0.1

  • Compatibility with SD1 Merrill.

Ver.1.0

  • It is possible to control cameras and take pictures from the computer. In addition, it is possible to store images to either the card in the camera or the PC Drive, or both simultaneously.
  • Even if the camera is connected to the computer, it is possible to operate the camera and take pictures by operating the camera body.
    * There is a restriction on timing for taking pictures.
  • It is possible to set how many times the shutter is released automatically at one operation. During multiple frame shooting, autofocus will set for each exposure.
    * If the focus mode is set to MF, the shutter will be released the number of times which you set without auto focusing.

Notice

  • Before starting the download of the installer program, make sure all applications in your computer are closed.
  • Click the download button, or push the mouse button whilst holding down the Control key on your keyboard (Control+ Click).
  • Select "download linked file" from the displayed menu. Start the download of the file.
  • After completing the download of “SIGMA_Capture_Pro111.dmg” file, it will be mounted automatically and “SIGMA Capture Pro” disk image will be displayed. If the file is not mounted automatically, please double click the “SIGMA_Capture_Pro111.dmg” file. “SIGMA Capture Pro” disk image will then be displayed.
  • It is necessary that the firmware in the SD1 Merrill is 1.05 or later, and 1.10 or later in the SD1.

Install

  • To start the instalation drag and copy SIGMA Capture Pro folder from “SIGMA Capture Pro” Disk Image to applications folder. Installation will be complete after being copied to this folder.
  • Select and open the Applications folder from “Go” in the Finder menu.
  • If SIGMA Capture Pro 1.1.0 already has been installed on your computer, please delete the “SIGMA Capture Pro” folder in the “Application” folder before installing.

System Requirements

  • Mac OS X Ver. 10.5 or later and Intel Core Processor (Core2Duo or higher recommended, Power PC is not supported)
  • 2GB of RAM (3GB of more recommended)
  • 1GB of available hard disk space
  • 24bit or more graphic card
  • 1024 x 768 screen resolution
  • PC with USB2.0 port (USB1.1 or lower is not recommended)

SIGMA SD Series Website

Brochure

Page Top
PRINCIPLES
PHILOSOPHY
ORIGINALITY
TECHNOLOGIES
SAMPLE GALLERY
DOWNLOAD